Wind Wise ~ Massachusetts | July 28, 2014 | windwisema.org
Hoosac Wind is loud. It’s too loud to comply with Massachusetts noise limits. That’s why an April 28, 2014 letter to the Mass. Department of Environmental Protection offers remedies for the loud sounds. Iberdrola lists the exceedences measured in tests performed in January and February 2014 at monitoring stations at Tilda Hill Road and Moores Road:
• January 9, 2014 measurements were 42.4 dBA average Lmax at Tilda Hill South and 37.5 dBA average Lmax at Moores Road North. Ambient at those locations was 32.2 DBA and 26.7 dBA, respectively.
• February 20, 2014 measurements were 44.8 dBA average Lmax at Tilda Hill South and 44.4 dBA average Lmax at Moores Road North. Ambient at those locations was 27.8 DBA and 27.5 dBA, respectively. These unusual sound levels are attributed to a blade icing condition.
Too bad the company has not informed residents in Florida and Monroe, as it says in its letter it will do:
In addition to these technical modifications, New England Wind [Iberdrola Renewables] will be contacting neighboring residents inviting them to an information session. In that session New England Wind will listen to the concerns of landowners, discuss the sound test results, and detail our technical modifications. In addition, New England Wind will be offering scheduled tours of the site.
This report confirms what several acousticians noted after reviewing the original noise testing results from April 2013. Rob Rand analysed the initial acoustic report, and Stephen Ambrose illustrated the issues in “Back to the Future II” for a Townsend, Vermont presentation in November 2013.
The large increase in noise above what is a quiet rural background turns this sparsely populated rural area into an industrial zone. But because wind turbines are not regulated like normal industries, the noise continues through the night.
Among numerous issues raised about the initial testing in 2013 were:
Independent acousticians also found raw data tables in the April 2013 test report that indicated noise violations, but the company rejected the data on those sampling occasions because they were assumed to be anomalies.
Before the project was ever built, the original modeled noise assessment indicated to acousticians that there would be “widespread complaints” and “strong appeals to stop the noise.” This modeling was performed on a computer in California, without any background noise measurements done in Florida or Monroe MA.
People whose lives have been impacted by the Hoosac project should have a chance to be heard. They will have ideas for mitigation that allow them to have a good night’s sleep.
URL to article: https://www.wind-watch.org/news/2014/07/29/hoosac-wind-fails-noise-test/