Wind Watch is a registered educational charity, founded in 2005. |
Recently introduced legislation
Credit: constantcontact.com 31 May 2011 ~~
Translate: FROM English | TO English
Translate: FROM English | TO English
SB 98, Changing Setback Limits and other Regulations Applicable to Wind Energy Systems. This bill imposes additional requirements on the PSC’s rules governing local regulation of wind turbines. The bill requires the restrictions under the rules to provide reasonable protection from any health effects associated with wind energy systems, including health effects from noise and shadow flicker.
The bill eliminates the requirement for the PSC to promulgate rules regarding setback requirements, and requires instead that the owners of certain wind energy systems comply with distance requirements specified in the bill. The bill’s requirements apply to the owner of a “large wind energy system,” which the bill defines as a wind energy system that has a total installed nameplate capacity of more than 300 kilowatts and that consists of individual wind turbines that have an installed nameplate capacity of more than 100 kilowatts. Under the bill, the owner of a large wind energy system must design and construct the system so that the straight line distance from the vertical center line of any wind turbine tower of the system to the nearest point on the property line of the property on which the wind turbine tower is located is at least one-half mile. The bill allows a lesser distance if there is a written agreement between the owner of the large wind energy system and the owners of all property within one-half mile of the property on which the system is located.
The bill also requires that the straight line distance from the vertical center line of any wind turbine tower of the system to the nearest point on the permanent foundation of any building must be at least 1.1 times the maximum blade tip height of the wind turbine tower, unless the owners of the system and the building agree in writing to a lesser distance. In addition, the bill requires that the straight line distance from the vertical center line of any wind turbine tower of the system to the nearest point on any public road right-of-way or overhead communication or electric transmission or distribution line must be at least 1.1 times the maximum blade tip height of the wind turbine tower. By Sen. Lasee (R-De Pere) Comment on this bill.
This article is the work of the source indicated. Any opinions expressed in it are not necessarily those of National Wind Watch.
The copyright of this article resides with the author or publisher indicated. As part of its noncommercial educational effort to present the environmental, social, scientific, and economic issues of large-scale wind power development to a global audience seeking such information, National Wind Watch endeavors to observe “fair use” as provided for in section 107 of U.S. Copyright Law and similar “fair dealing” provisions of the copyright laws of other nations. Send requests to excerpt, general inquiries, and comments via e-mail.
Wind Watch relies entirely on User Funding |
(via Stripe) |
(via Paypal) |
Share: